Test kit Psycho-Energet. Balance

What is in the set

One hundred and twenty test ampoules across two tableaus. Tableau Yin carries PEB 001 to PEB 060 and is marked with a black corner; Tableau Yang carries PEB 061 to PEB 120 and is marked with a white corner. Within each tableau the top six rows are the meridian and emotion ampoules, colour coded to the five elements, and the rows below carry the level, extended diagnostic and support groups.

This is the digitised set. It is delivered through BICOM® multisoft pilot rather than as glass ampoules, so the software licence is a prerequisite, not an optional extra.

• 120 test ampoules
• 2 tableaus, Yin and Yang
• 192.0 A test program
• 198.0 therapy program

Tableau Yin, PEB 001 to PEB 060, black corner

Tableau Yang, PEB 061 to PEB 120, white corner

The groups

Superior meridian 12, control and emotion brain 1, 5-Elements emotion 60, brain emotion 5, level 6, extended diagnostic 18, support and stabilisation 18.

How the set is tested

The manufacturer’s sequence. All ampoules are tested and used with therapy mode A.

1. Superior ampoules. The grasping applicator is connected via a black cable. With program 192.0 A running, the twelve meridian ampoules and the control and emotion brain ampoule are checked for resonance in sequence.
2. Emotion ampoules, with a superior. The superior ampoule from step one goes in the input cup. The emotion ampoules belonging to it are then checked in sequence.
3. Emotion ampoules, without a superior. Only if no superior ampoule was determined. All sixty-five emotion ampoules are tested through the grasping applicator. A result here reads as no disturbance at meridian level, but one at emotion level.
4. Level ampoules. The six level ampoules are tested one after another. Resonance here tells you which further test sets to continue the search in.
5. Extended diagnostic ampoules. The four light blue groups are checked in turn, for causal stress beyond the 5-Elements system.
6. Support and stabilisation ampoules. The four pink groups are checked in turn. This step surfaces supporting ampoules and further therapy approaches.

Where several ampoules resonate, the priority test narrows the result down: one ampoule in the input cup at ten-fold amplification against the other under the grasping applicator at one-fold.

Where a level result points next

Before you order

• BICOM® multisoft pilot. Required. This is a digitised test set and cannot be used without the software.
• A BICOM® device. Testing runs on program 192.0 A. Treatment uses program 198.0 or program sequence 10327.
• Therapy mode A. Every ampoule in this set is tested and treated in mode A. Modes A and Ai must not be mixed within a session.
• Eight ampoules maximum. Where determined ampoules resonate in combination, the manufacturer recommends no more than eight in the input cup of channel 1.

Supplied for use by practitioners trained in the BICOM® method. The descriptions here are drawn from the manufacturer’s product documentation (Regumed, G16EL P-99/ETT-EN/Feb 2021) and are reproduced for identification of the set’s contents. The guide carries symptom lists which are not reproduced. We make no claim as to therapeutic effect.